Complete Power Steering Rack Pinion For Buick Lacrosse Chevrolet Impala 2000-11
Posted on December 10, 2021 | By admin
Steering gear, also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction. Thus making it easier to turn the wheels. Part: Steering Rack and Pinion. Complete Power Steering Rack Pinion For BUICK LACROSSE CHEVROLET IMPALA 2000-11. Also called steering gear, is the most important part of automobile steering system. Or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion. Is the most important part for vehicle swerving and security assurance. Casting Material : Steel/Aluminum Package Contents : Rack and Pinion, Installation Kit, Instruction Sheet Product Condition : Remanufactured Number of Mounting Holes : 2 Hose Port Type : O-Ring Tie Rod Ends Included : Inner Total Turns Lock To Lock : 3 Pressure Port Thread Size : M18 x 1.5 Return Port Thread Size : M16 x 1.5 Rack Length (mm) : 1257.30 Thread Length (In) : 2.45 Thread Length (mm) : 62.23 Distance Between Mounting Holes (in) : 12.25 Distance Between Mounting Holes (mm) : 311.15 Steering Rack Color : Black Input Shaft Diameter (in) : 0.66 Input Shaft Diameter (mm) : 16.78 Input Shaft Length (in) : 1.88 Input Shaft Length (mm) : 47.75 Rack Length (in) : 49.50. 22-186 280A FIT FOR Buick, Century, LaCrosse, Allure, Regal, Monte Carlo, Grand Prix, Pontiac, Power Steering, LS LT LTZ CX CXL CXS Super Police SS Base 50th, GT Custom Limited Special SE, 5.3L 3.9L 3.8L 3.6L 3.5L 3.4L 3.1L 3.0L. Compatible with the following vehicles. BUICK REGAL 1997 W/O MAGNASTEER. CHEVROLET IMPALA 2000 – 2011. CHEVROLET MONTE CARLO 2000 – 2007. In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation. In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred. Turn the steering wheel to the straight ahead position. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear. Install the steering gear on the mounting base and tighten the fixing bolts. Universal joint or coupling between mounting column and steering gear. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed. Keep the steering wheel in straight ahead position. Put the pitman arm on the steering gear to align the two marks. Tighten the locknut according to the specified torque and rivet (anti loose pit). Rack & Pinion Complete Unit;Steering Rack;Steering Gear. Corrosion and rust prevention. Backed by satisfying after-sales service. Rotate quickly and normal position. 22-186;280A;19320490;1030161;36R0392. Rack replacement kit, rack and pinion, power rack parts. Power Steering Rack;Steering Rack and Pinion. Rack and Pinion Assembly, Rack and Pinion Rack Gear. Top performance For long service life. 2010 Chevrolet Impala LT Sedan 4-Door 3.5L 3490CC. The note there will NOT be read. The images shown are not the actual item and are for your reference only. There are NO EXCEPTIONS! OR, you may choose to have a replacement. FEEDBACK IS VERY IMPORTANT TO US. Fuel Injectors For 2013 2014 Nissan For Versa SL Base SV S 1.6L 166001KT0A. 200PSI Digital Air Tire Inflator with Pressure Gauge Chuck for Truck/Car/Bike. Engine Motor & Trans Mount For 1992 Honda Accord LX Sedan 4-Door 2.2L A6547 6587. Starter For Polaris & Drive 300 Big Boss 250 Scrambler Sportsman 400 3085393. 2 Front Hood Gas Lift Supports Shock Struts Props For Ford Explorer 2002 to 2010. New Starter For Ford Mercury Crown Victoria Lincoln Mark Series 4.6L SFD0028. Starter for Chevy Silverado Truck 6.0L 02 03 04 05 6492 10465550 9000880 USA. Starter For Chevy 2.2L S10 02 03 Monte Carlo 3.4L Venture Impala 2001-05 SDR0189. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Cylinder Head Gasket Sets. Cylinder Piston Gasket Sets. Brake Rotors & Pads. Brake Rotors Pads Kit. Idle air control valve. Secondary Air Injection Pump. Spark Plug Ignition Wire. Oil Fuel Hose Line. Fuel Injector Wiring Harness. Tire Inflator Air Pump. Rear Window Louver Cover. The item “Complete Power Steering Rack Pinion For Buick Lacrosse Chevrolet Impala 2000-11″ is in sale since Friday, April 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Gearboxes, Rack & Pinions”. The seller is “autoparts-leader” and is located in Ontario, California. This item can be shipped to United States.
- Brand: Autoparts-leader
- Manufacturer Part Number: AP10883101L
- Type: Rack & Pinion Complete Unit;Steering Rack;Steering Gear
- Performance Part: Yes
- Installation method: Performance/Custom
- Fitment Type: Direct Replacement
- Material: High Quality Steel
- Surface Finish: Polished, Rust Protected
- UPC: Does not apply
- Manufacturer Warranty: 3 Years
- Vintage Car Part: Yes
- Rack Type: Hydraulic
- Greasable or Sealed: YES
- Other Part Number: Steering gear
- Rack Material: corrosion and rust prevention
- Note: Backed by satisfying after-sales service
- Advantage: Rotate quickly and normal position
- Interchange Part Number: 22-186;280A;19320490;1030161;36R0392
- Superseded Part Number: 26056808;26021769;26079913
- OE/OEM Part Number: rack replacement kit,rack and pinion,power rack parts
- OE Number: Power Steering Rack;Steering Rack and Pinion
- Sub Type: Rack and Pinion Assembly, Rack and Pinion Rack Gear
- Package: Dust plug
- Universal Fitment: No
- Itment Note: Top performance For long service life
- Mounting Hardware Included: As the picture
- Fits: BUICK CENTURY 1997-2005 W/O MAGNASTEER
- For: 2010 Chevrolet Impala LT Sedan 4-Door 3.5L 3490CC