https://completepartskit.com Fri, 17 Apr 2026 17:11:44 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://completepartskit.com/glock-17-slide-9mm-complete-rmr-cut-ss-barrel-10rd-mag-buis-used-condition/ https://completepartskit.com/glock-17-slide-9mm-complete-rmr-cut-ss-barrel-10rd-mag-buis-used-condition/#comments Tue, 23 Dec 2025 14:09:53 +0000 https://completepartskit.com/glock-17-slide-9mm-complete-rmr-cut-ss-barrel-10rd-mag-buis-used-condition/










Completely Assembled Ready To Install Fits Glock Gen 1-3 RMR Cut Slide For Glock 17 With Stainless Steel Barrel and FREE Magpul 10rd Magazine. Condition Description – PLEASE READ. This Slide was used as a display gun, and fired. Approximately 50 rounds were fired sighting in a red dot sight. The slide shows some normal wear from firing on the underside and rails, with a couple of dings and scratches from being handled while on display. The barrel is NEW and has never been fired. All internal slide parts and guide rod are NEW and have never been used. Black Cerakoted (graphite black) Stainless Steel slide. Milled for RMR footprint optics. RMR cover plate included. Side vents & serrations for easy gripping. NEW slide parts kit installed. OEM polymer guide rod. Aluminum white dot BUIS. 416r NEW Stainless Steel barrel. Aluminum RMR cover plate. New installed slide parts kit. New Magpul 10rd Glock 17 magazine. And is one of many trademarks owned by Glock, Inc. Or Glock Ges. M. B. Is not affiliated with nor endorsed by Glock, Inc. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.

]]> https://completepartskit.com/glock-17-slide-9mm-complete-rmr-cut-ss-barrel-10rd-mag-buis-used-condition/feed/ 0 https://completepartskit.com/glock-19-slide-complete-assembled-rmr-cut-withbarrel-buis-lp-kit-fits-gen-1-3/ https://completepartskit.com/glock-19-slide-complete-assembled-rmr-cut-withbarrel-buis-lp-kit-fits-gen-1-3/#comments Sun, 29 Oct 2023 22:11:24 +0000 https://completepartskit.com/glock-19-slide-complete-assembled-rmr-cut-withbarrel-buis-lp-kit-fits-gen-1-3/












Completely assembled ready to install Fits Gens 1-3 RMR Cut Slide for the Glock 19 + Lower Parts Kit. This slide has the upper parts kit & barrel installed, along with aluminum back up sights. Drop in, ready to go. Also included and pre-installed is the cover plate for use when an optic is not installed. Lower Parts Kit Included (you will need to install that on your frame). Black Cerakoted (graphite black) Stainless Steel slide. Milled for RMR footprint optics. Side vents & serrations for easy gripping. Stainless steel guide rod. Aluminum blank 3 dot ready backup sights. Apply paint colors of your choice to customize the sights (paint not included). Black Nitrided 4150 CMV barrel, 1:12 twist. Aluminum RMR cover plate. LPK For GLOCK 19 Gens 1- 3 LPK Lower Parts Kit. Slide Stop Lever with Spring. Trigger Housing with Ejector. Trigger with Trigger Bar. And is one of many trademarks owned by Glock, Inc. Or Glock Ges. M. B. Is not affiliated with nor endorsed by Glock, Inc. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.

]]> https://completepartskit.com/glock-19-slide-complete-assembled-rmr-cut-withbarrel-buis-lp-kit-fits-gen-1-3/feed/ 0 https://completepartskit.com/glock-17-gen-3-complete-slide-rmr-cut-nitrided-barrel-assembled-kit-buis/ https://completepartskit.com/glock-17-gen-3-complete-slide-rmr-cut-nitrided-barrel-assembled-kit-buis/#comments Fri, 30 Jun 2023 19:28:50 +0000 https://completepartskit.com/glock-17-gen-3-complete-slide-rmr-cut-nitrided-barrel-assembled-kit-buis/








Assembled Ready To Install RMR Cut Slide For Glock 17 Gens 1-3 With Nitrided Barrel & Guide Rod Plus Aluminum BUIS. Superior QUALITY Stainless Steel Slide Cerakoted Graphite Black. RMR Cut For Optics Using RMR “Footprint, ” Such As Trijicon, Holosun, Swampfox, Riton, Ade, NcStar. RMR Cover Plate Included To Cover The Cutout When Optics Are Not Installed. Upgraded Stainless Steel Guide Rod. Works With All OEM And High Quality Aftermarket Parts & Accessories. Compatible With Glock Gens 1-3. Will Not Work With Gen 4 or Gen 5. And is one of many trademarks owned by Glock, Inc. Or Glock Ges. M. B. Is not affiliated with nor endorsed by Glock, Inc. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.

]]> https://completepartskit.com/glock-17-gen-3-complete-slide-rmr-cut-nitrided-barrel-assembled-kit-buis/feed/ 0